MG Chemicals – 8341-10ML 8341 No Clean Flux Paste, 10 milliliters Pneumatic Dispenser (Complete with Plunger & Dispensing Tip)

No Clean Flux Paste. Convenient syringe dispenser ideal for touch up and repair of surface mount assemblies. A unique mixture of high grade synthetic resin and thixotropic agents designed specifically for use with high temperature lead free and conventional Sn/Pb alloys. It provides the fluxing activity levels that promote fast wetting action and maximum wetting spread. Flux paste is a no clean formulation therefore the residues do not need to be removed for most applications. Excellent wettability, no clean, non-conductive, non-tacky residues, compatible with lead free and leaded solder systems, thixotropic paste and RoHS compliant. RoHS compliant.

HP Color Laser Jet Pro MFP M277dw – Best toner cartridge replacements

Best bang for the buck toner cartridge replacements we have found are HERE

TRUE IMAGE Compatible Toner Cartridge Replacement for HP 201A 201X CF400X CF400A Color Pro MFP M277dw M252dw M277c6 CF401X CF402X CF403X M252 M277 Printer (Black Cyan Yellow Magenta, 4-Pack)

  • Include: 4 packs 201X toner compatible for HP 201A CF400A CF401A CF402A CF403A and CF400X CF401X CF402X CF403X HP 201X toner cartridges
  • High Page Yield:2,800 pages for 201X black toner and 2,300 pages for per 201X color toner at 5% coverage (Letter/A4) compatible for HP MFP M277dw toner cartridges
  • Compatible Printers: HP Color Pro MFP M277dw toner printer, HP Color Pro M252dw toner printer, HP Color Pro MFP M277c6 toner printer, HP Color Pro M277 M277n M274n M252n printer
  • Color: 1 pack 21X CF4X black toner, 1 pack 21X CF41X cyan toner, 1 pack 21X CF42X yellow toner, 1 pack 21X CF43X magenta toner
hp color laserjet pro mfp m277dw toner cartridges
hp 201a

Viper 7752V Battery replacement

Our Viper Alarm/Keyless Entry/Remote start key fob started to have a very short lifespan between charges. The key fob charges via a usb type-b cable and when new offers quite a bit of lifespan between charges.

This specific one is about 8 years old though so the battery is well past its best part of its life.

It is very easy to find a replacement battery and it only takes one small phillips screw to expose where the battery is inside, and then all you have to do is unplug the battery cable from the circuit board and carefully remove the battery from the case.

Viper 7752V battery exposed after removing case



Here is the Amazon link for the correct battery for a Viper 7752V Key fob: LINK HERE

At the time of writing, this battery was $9.49 on Amazon

Best heat shrink deal – 360 Pcs 3:1 Shrink Ratio Dual Wall Adhesive Lined Heat Shrink Tubing Tube 6 Sizes

  • 3:1 Ratio | 360 pieces | Thin adhesive inside liner. | Double Color: Black&Red
  • 6 Sizes: 1/16″(143 pcs), 3/32″(100 pcs), 1/8″(60 pcs), 3/16″(24 pcs), 1/4″(24 pcs), 3/8″(9 pcs)
  • Heat activated adhesive lining provides impermeable seal to salt water and other liquids.
  • Great for Christmas light wiring, marine, auto, and misc. electrical applications.
  • All packed in a plastic container for easy organization and storage.

Battery Shrink Wrap 2.95 Inch Flat Width Heat Shrink Tube Protective Film 6.5ft for RC Lipo Battery

  • Material: polyolefin, environmentally friendly heat shrinkable tubing insulation; Length ( approx.): 2M/6.5Ft; Color: Transparent; Flat Width: 75mm/2.95inch
  • Thickness: 0.2mm (before shrinkage); Shrink Temperature Range: -55℃ ~ 125℃
  • Perfect for wire connection, solder joint protection, rc lipo battery shrink wrap
  • Rated Voltage : 600V; Shrink Ratio: 50%
  • It is recommended to use a heat gun to shrink

Specification
Material : Polyolefin ;
Rated Voltage : 600V
Shrink Temperature Range: -55℃ ~ 125℃
Shrink Ratio : 2:1
Heating tool: hot air gun

Feasture:
Flame retardant, environmental protection, insulation, soft, stable performance, low temperature shrinkage, shrinking fast, etc.
Can have the effect of anti-counterfeiting and beautify the packing materials,
and the items were capsuled can have insulation, moistureproof, anticorrosive, the effect of dustproof, etc.
Applicance: Used for Lipo Battery Pack Covering.

Package Included
6.56 feet Heat Shrink Tube

Flysky FS-GT3B 3CH RC System 2.4G Radio Control Transmitter with FS-GR3E Receiver for RC Car Boat

  • Fits most RC cars and trucks. Lightweight upgrade instantly enhances overall performance in handling and durability
  • 3CH remote control for RC cars and boats. Works between 2.400GHz to 2.4835GHz frequencies, divided into 160 wave bands.
  • It covers the entire band width of the antenna bandwidth range. Adopts AFHDS (Automatic Frequency Hopping Digital System).
  • High receiving sensitivity. Super active and passive anti-jamming capabilities.
  • Very low power consumption, and stable performance. LCD screen display.

Description:
The working frequency between 2.40GHz-2.4835GHz has been divided into 160 frequency points, each system uses 16 points and 160 hopping frequency to avoid frequency jamming
The system is specially developed for all the Radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity
Unique ID for each transmitter: the receiver will automatically check ID after successful pairing, and this dramatically increases the ability of anti-jamming.
Channels:3 Channels

Feature:
Model type:car/boat;
RF range:2.40-2.48GHz;
Bandwidth:500Hz;
Band:160;
RF power:less than 20DB;
2.4G system:AFHDS;
Code type:GFSK;
Senditivity:1024;
Low voltage warning:yes(less than 9V)
DSC port: yes(3.5mm:output:PPM);
ST range:90;
TH range:45(F:30;B:15);
Charger port:yes;
Power:12V DC(1.5AA*8);
Weight:328g;
ANT length:26mm;
Size:159*99*315mm;

Package Include:
1 x Gun Controller
1 x Receiver
1 x Antenna Tube
1 x Bind plug