Month: August 2021

• Material: polyolefin, environmentally friendly heat shrinkable tubing insulation; Length ( approx.): 2M/6.5Ft; Color: Transparent; Flat Width: 75mm/2.95inch
• Thickness: 0.2mm (before shrinkage); Shrink Temperature Range: -55℃ ~ 125℃
• Perfect for wire connection, solder joint protection, rc lipo battery shrink wrap
• Rated Voltage : 600V; Shrink Ratio: 50%
• It is recommended to use a heat gun to shrink

Specification
Material : Polyolefin ;
Rated Voltage : 600V
Shrink Temperature Range: -55℃ ~ 125℃
Shrink Ratio : 2:1
Heating tool: hot air gun

Feasture:
Flame retardant, environmental protection, insulation, soft, stable performance, low temperature shrinkage, shrinking fast, etc.
Can have the effect of anti-counterfeiting and beautify the packing materials,
and the items were capsuled can have insulation, moistureproof, anticorrosive, the effect of dustproof, etc.
Applicance: Used for Lipo Battery Pack Covering.

Package Included
6.56 feet Heat Shrink Tube

• Fits most RC cars and trucks. Lightweight upgrade instantly enhances overall performance in handling and durability
• 3CH remote control for RC cars and boats. Works between 2.400GHz to 2.4835GHz frequencies, divided into 160 wave bands.
• It covers the entire band width of the antenna bandwidth range. Adopts AFHDS (Automatic Frequency Hopping Digital System).
• High receiving sensitivity. Super active and passive anti-jamming capabilities.
• Very low power consumption, and stable performance. LCD screen display.

Description:
The working frequency between 2.40GHz-2.4835GHz has been divided into 160 frequency points, each system uses 16 points and 160 hopping frequency to avoid frequency jamming
The system is specially developed for all the Radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity
Unique ID for each transmitter: the receiver will automatically check ID after successful pairing, and this dramatically increases the ability of anti-jamming.
Channels:3 Channels

Feature:
Model type:car/boat;
RF range:2.40-2.48GHz;
Bandwidth:500Hz;
Band:160;
RF power:less than 20DB;
2.4G system:AFHDS;
Code type:GFSK;
Senditivity:1024;
Low voltage warning:yes(less than 9V)
DSC port: yes(3.5mm:output:PPM);
ST range:90;
TH range:45(F:30;B:15);
Charger port:yes;
Power:12V DC(1.5AA*8);
Weight:328g;
ANT length:26mm;
Size:159*99*315mm;

Package Include:
1 x Gun Controller
1 x Receiver
1 x Antenna Tube
1 x Bind plug

Got this motor and ESC Combo to Upgrade a REMO Hobby Smaxx RC truck

• Brushless
• 2s LiPo capable
• for 1/16 to 1/18 cars/trucks
• 2mm shaft with multiple common hole patterns for motor mounts on 1/16 & 1/18 scale cars/trucks so it makes it a direct fit for almost all if the physical size fits
• 2435 (size) (24mm diameter – 35mm length)
  

We have used these on everything from hobby DIY electronics projects, to replacements for RC cars, very tough internal metal gears and great bang for the buck!

20KG Digital Servo Full Metal Gear High Torque, Aluminum Case Waterproof for Robot DIY (Control Angle 180)

• 20kg large torque. 20 kg·cm (277.6 oz·in) @ 6.6V. Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)
• Fully sealed waterproof rubber seal ring, can effectively resist moisture.
• Using high-precision potentiometer with new design. Accuracy and linearity have been greatly improved! Accurate movement can satisfy the needs of making robots.
• 180 degree rotation. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control. Can be rotated within 360 degrees when power off have been greatly improved! Accurate movement can satisfy the needs of making robots.
• Age: 14 years and up